Plumbing

2" Aluminum Roof FlashingSPECIFICATIONS• 25 Mil Base• Fits 45 Degree Pitch

2" Black Split-Ring Hanger (Hinge-Type)SPECIFICATIONS• Size: 2"• Material: Malleable Iron• Finish: Black• Maximum rec. load 180 LBS

2" Black Split-Ring Hanger (Screw-Type)SPECIFICATIONS• Size: 2"• Material: Malleable Iron• Finish: Black• Maximum rec. load 180 LBS

2" Black Steel Riser ClampSPECIFICATIONS• Length: 10.5"• Stock: 5/32 X 1"• Bolt: 3/8" X 1 1/2"• Maximum rec. load 300 LBS• Domestic• Material: Steel

2" Brass LocknutsSPECIFICATIONS• Material: Brass

2" Brass Shower Stall StrainerSPECIFICATIONS• Size: 2"• Height: 1"• Grid: 14 Slot Stainless Steel• Base: Rough Brass

2" Carbon Steel 150# Flat Faced FlangesSPECIFICATIONS• Material: Carbon Steel

2" Cast Iron Wing Nut Test PlugSPECIFICATIONS• Diameter: 1 3/4"• Maximum Back Pressure: 10 PSI

2" Chrome-Plated Brass Shower Strainer For Shower Pan Liner DrainSPECIFICATIONS• Height: 2"• Grid: 58 Square Hole Stainless Steel• Base: Heavy Chro...

2" Chrome-Plated Die Cast Adjustable Shower HeadSPECIFICATIONS• Size: 2"• Flow Rate at 80 PSI: 2.5 GPM• Material: Die-Cast• Finish: Chrome-Plated

2" Chrome-Plated Die-Cast Shower Stall StrainerSPECIFICATIONS• Size: 2"• Height: 7/8"• Grid: 14 Slot Stainless Steel• Base: Chrome-Plated Die-Cast

2" Closet Spud CompleteSPECIFICATIONS• Furnished with Washer• 2" X 2"• Materials: Body Brass / Friction Ring Galvanized Steel

2" Companion Flange Gasket - FiberSPECIFICATIONS• ID: 2 1/4"• OD: 6"• 1/16" Thick• Maximum Temperature: 600 Degrees Fahrenheit• Number of Holes: 4•...

2" Compound GaugeSPECIFICATIONS• Increments: Below 0 - 2"HG/Above 0 - 1LB. • Range: 30" HG To 0 To + 30 LBS.• 1/4" NPT Brass Lower Connection• Uses...

2" Compression Sewage Ejector Check ValveSPECIFICATIONS• Size: 2"• Length: 6 3/4"• Material: Heavy Duty ABS• Made in the USA

2" Compression Silent Sewage Ejector Check ValveSPECIFICATIONS• Size: 2"• Length: 12 1/2"• Material: Heavy Duty ABS• Made in the USA

2" Con-Stab Coupling SDR-11SPECIFICATIONS• Size: 2" IPS• SDR-11• PSI: 125• UPC/CSA Approved• MA Code Approved• Chamfer Tool Required

2" Con-Stab Elbow SDR-11SPECIFICATIONS• Size: 2" IPS• SDR-11• PSI: 125• UPC/CSA Approved• MA Code Approved• Chamfer Tool Required

2" Con-Stab End-Cap SDR-11SPECIFICATIONS• Size: 2" IPS• SDR-11• PSI: 125• UPC/CSA Approved• MA Code Approved • Chamfer Tool Required

2" Con-Stab Tee SDR-11SPECIFICATIONS• Size: 2" IPS• SDR-11• PSI: 125• UPC/CSA Approved• MA Code Approved • Chamfer Tool Required

2" Copperized StrapsSPECIFICATIONS• Size: 2"• Thickness: .021• Material: Copper-Plated Steel• Hole Size: .180"

2" Countersunk Head Brass PlugSPECIFICATIONS• Material: Brass• Southern Code

2" CTS Floor & Ceiling Plate With SpringSPECIFICATIONS• NOM: 2" CTS (2.13)• Material: Steel• Spring

2" CTS Strut ClampSPECIFICATIONS• Size: 2" CTS• Thickness: 16 Gauge• Material: Copper-Plated Steel• Bolt & Nut: 1/4 X 1

2" Deluxe Snap Well Thermometer With 2 WellsSPECIFICATIONS• Range: 40 to 240 Degrees Fahrenheit• Increments: 5 Degrees Fahrenheit• Connection: 3/4"...

2" Fitt'n SaverSPECIFICATIONS• Size: 2"

2" Flanged Carbon Steel Y-Strainer For Con-EdSPECIFICATIONS• Con-Ed Requirements As Of 7/15• Material: Carbon Steel• Finish: Epoxy Coat• 40 Mesh In...

2" Flanged Spud WasherSPECIFICATIONS• Size: 2"

2" Galvanized 2 Hole Pipe StrapsSPECIFICATIONS• Size: 2"• Thickness: 16 Gauge• Material: Galvanized Stamped Carbon Steel• Hole Size: .281

2" Galvanized Friction RingSPECIFICATIONS• Size: 2"• Material: Galvanized Steel

2" Galvanized Malleable Iron Vent CapSPECIFICATIONS• Material: Malleable Iron• Finish: Galvanized• Furnished with Screen

2" Galvanized Stamped Slip-On Vent CapSPECIFICATIONS• Size: 2" IPS• Finish: Galvanized• Material: Malleable Iron• Furnished with Screen & Screw

2" Garlock 3000 Blue Full Face GasketSPECIFICATIONS• Gasket: Non-Asbestos

2" Garlock 3000 Blue Ring GasketSPECIFICATIONS• Gasket: Non-Asbestos

2" Garlock 3000 Ring Gasket StrainerSPECIFICATIONS• Gasket: Non-Asbestos• Gasket: 60 Mesh Strainer

2" Gas Regulator VentSPECIFICATIONS• Screen: 16" X 16" - .0018 Gauge Steel• Material: Non-Corrosive Aluminum

2" Gas Test Kit- 100 PSISPECIFICATIONS• Gauge Type: Bourdon Tube• Gauge Increments: 2 LB.• Gauge Size: 2"• Furnished with 1/8" Brass Air Valve• 3/4...

2" Gas Test Kit- 15 PSISPECIFICATIONS• Gauge Type: Bourdon Tube• Gauge Increments: 1/2 LB.• Gauge Size: 2"• Furnished with 1/8" Brass Air Valve• 3/...

2" Gas Test Kit- 30 PSISPECIFICATIONS• Gauge Type: Bourdon Tube• Gauge Increments: 1/2 LB.• Gauge Size: 2"• Furnished with 1/8" Brass Air Valve• 3/...